THE LEADER IN ZIPLINE SOLUTIONS | CONSULTANT DESIGN CONSTRUCTION INSTALLATION TRAINING CERTIFICATION
Reliable Zip Line Installation Services - Trusted Experts
SAM ZIP LINE ONE OF THE ASIA'S LARGEST ZIPLINE MANUFACTURER
WHAT IS ZIPLINE : A zip-line (also known as a flying fox, foodie slide, zip wire, aerial runway, aerial rope slide, death slide or Tyrolean crossing consists of a pulley suspended on a cable mounted on an incline. It is designed to enable a user propelled by gravity to travel from the top to the bottom of the inclined cable, usually made of stainless steel, by holding on or attaching to the freely moving pulley. Zip-lines come in many forms, most often used as a means of entertainment. They may be short and low, intended for child's play and found on some playgrounds. Longer and higher rides are often used as a means of accessing remote areas, such as a rainforest canopy. Zip-line tours are becoming popular vacation activities, found at outdoor adventure camps or upscale resorts, where they may be an element on a larger challenge or ropes course.
A zip line is a means of moving people or equipment over rough or pristine terrain using a cable and special zip line trolley system. There are many variations and uses. The most common use of the term is that of a ride. As an adventure ride, the zip line usually traverses over beautiful landscape or dense rainforest or desert canyons. The rider fastens into a harness or seat and launches out over the expanse. It is a thrilling ride, moving quickly and covering rugged terrain. Zip line rides slow to a landing speed as the line levels out naturally at the other end. Often there will be a platform or ground features that meet the rider just at the end. This occurs naturally because of the sag in the cable. The designer ensures the cable tension is not too tight and not too loose. Tight zip line cables will tend to keep the ride at a relatively constant speed, while a line with less tension will start fast and slow down near the end.
How to build Zip Line & Sky Zip Cycle by SAM Zip Line...
SAFE & SUSTAINABLE ZIP LINES Our all the zip lines & rope course that we build are built by the European Safety Standard EN 15567:2007 & American National Safety Standard {We are also member of PRCA, USA Approved by ANSI, American National Standards Institute} and are tested and certified before completion. Active Constructions builds high quality ziplines with a strong presentation. By using different materials and finishing techniques we are able to give every zipline the desired look, whether it’s a natural ‘look & feel’, an industrial setting or complete theme creation.
SITE SELECTION Prior to installing your zip line an appropriate location must be selected. You will need a clear runway for your zip line with a sturdy anchor on both ends, and enough slope in the cable to propel your participants from one end to the other. Although there are relatively few locations where a zip line cannot be installed, some locations will provide for a safer and more enjoyable ride than others.
CENTER DISMOUNT - The center dismount is hung with a considerable belly or drape in the cable. The rider launches and speeds down to the center then starts up the other side. The rider slows to a stop before reaching the end of the cable and slides back down to the low point (not always the center) where they are dismounted using a ladder or removable platform. Center dismount zips can be as long as 5,000 feet without specialized equipment. The weight of the rider, trolley type, and wind speed are not significant factors for center dismount zips.
WALK-UP LANDING – Zip Lines or Walk-up landing Zips are used for most commercial canopy tours and zip line tours where riders go from one end to the other and land on a platform or ground near the very end of the zip line cable. The weight of the rider, wind speed, and type of pulley/trolley used will affect the speed and the landing for each rider. The longer the cable, the more unpredictable the landing speed. A variety of new braking systems have really improved safety and allowed for faster rides and more predictable landing speeds.
TOWER to TOWER – These designs are gaining popularity mostly with amusement parks, water parks and other closed venues. Typically these are less than 800′ zip lines and will have multiple cables going back and forth. Pre-engineered steel tower designs are available. These zip line towers are usually built with stair cases to easily accommodate a variety of ages and abilities.
POLE & STEEL MOUNT ZIP LINES – Allow for complete control over length, landing speed, heights and configuration. MS/Steel Pole zips can be designed to accommodate almost any zip line design need. Zip lines can be designed over canyons, cliffs and open range up to over 5,000 feet.
Personal Protective EQUIPMENT (PPE)
The personal protective equipment (PPE) worn by participants is imported from leading international brands such as Camp, Head Rush, Petzl, Edelrid, ISC, NRS, or Simond, and it conforms to UIAA standards. The abbreviation PPE stands for Personal Protective Equipment. These are necessary to guarantee the safety of both park employees and park visitors. We also feel very responsible when it comes to PPE. Therefore, we advise our customers to make the correct choices for the purchase and use of pulleys, trolleys, harnesses, helmets, and other personal protective equipment needed for the activities.
Many zip lines have platforms where the riders start from and end at. If you have topography working for you, you may only need simple platforms for riders. You may need raised platforms if you do not have enough elevation change. Zip line platform design will depend on topography, primary and secondary brake requirements, and space required for guide and rider comfort. Make sure your platform is long enough to give your zip line brake plenty of room to operate safely while still leaving space for an appropriate emergency brake.
- THE ZIP LINE PLATFORM DESIGN
In zip lining as in life, it's about the journey and not the destination, and the line is what defines your zip line. The line defines what scenery or views your riders will enjoy, how long they will enjoy those views, and how fast they will go. The length and starting and ending points will be some of the first decisions you have to make when designing your zip line. As for the line itself, many zip lines are made of stainless steel or galvanized aircraft cables.
- THE ZIP LINE CABLE
The zip line trolley is your rider's vehicle down the line. Trolleys come in many different shapes and sizes, so how do you pick? Think about how fast your zip line is and make sure your trolley can handle those speeds. The trolley should also be designed to match the braking system at the end of your line.
-THE ZIP LINE TROLLEY
Zipline Design Features & Components for a Complete System
”Every day, they strive to improve their service to the clients by developing the right blend of technology and creativity to make sure every job done is done as efficiently as possible.”
- THE ZIP LINE CABLE INSTALLATION HARDWARE
Learn how to choose the correct zip line harness for the type of zipline you do to be closest to flying like an eagle like Superman, or maybe you want to comfortably seat in a chair.
-THE ZIP LINE HARNESSES
An emergency arrest device (EAD), or emergency brake, is an essential component of a complete zip line brake system. An EAD is a secondary brake that will automatically engage in the event that the primary brake fails and will prevent rider injury or death. When installing a zip line, unmanned testing should be conducted to ensure proper function of both the primary brake and the EAD.
- THE ZIP LINE EMERGENCY BACKUP BRAKE
This is one of the most important parts of the zip lining experience. Many riders will ask "How do I stop at the end" before they clip into the ride. That's because they want to know what to expect at the end and what they will be required to do. The best zip line brakes offer passive braking; this means the rider does not have to participate in braking and will automatically be slowed to a stop at the end of the line.
- THE ZIP LINE BREAKING SYSTEM
Reinforcement is one type of material which is used in construction. It's one type of bar that provide ductility to any structure member like Columns, beams, slabs, etc. Reinforcement has ductile behavior which increase strength of zipline and give sign.
- THE ZIP LINE REINFORCEMENT & CIVIL DESIGN
WANT TO SEE MORE?
FEEL FREE TO CONTACT, IF YOU WANT MORE INFORMATION ABOUT THE REALIZATION OF A ZIP LINE & ADVENTURE ACTIVITIES SETUP DESIGN, INSTALLATION & CONSTRUCTION.
YOU CAN CALL TO +91 9811336992
TODAY, ZIP LINING IS PRIMARILY AN ADVENTURE THRILL RIDE
SAM Zip Line Install World High Altitude From 10600 Above The Sea Level & Indian Longest 2300 meters Zip Line at Desert Himalaya Adventure Park, Nubra Vally, Ladakh.
SAM Zip Line Installs an 850-Meter Zipline in Nepal's First Superman Zipline.
SAM Zip Line Install Indian Longest 1800 meters Superman Zipline at Black Eagles Camp, Munnar, Suryanelli, Kerala.
SAM Zip Line Install Indian Longest 350 meters Sky cycle Zipline at Gulaba, Manali-Leh Highway, Himachal Pradesh.
SAM Zip Line Install Over the Lake 350 meters Superman Zip Line at Nakuchiyatal, Uttarakhand.
05 Asian countries and 22 Indian States install ziplining and adventure park setup by SAM Zip Line.
SAM Zip Line Install Over the Rive 1275 meters Superman & Classie Zip Line in Nepal.
SAM ZIP LINE Build expert scientifically designed, manufactured, building and installation of Giant Swing. Whether it is Giant Swing installations in India, Nepal, Bhutan, Bangladesh, Double or Four Giant Swing Designer Builder up to 120 feet height.
One of the most popular activity and it's no wonder! Your teammates pull on a rope that raises you up 26 metres (our giant swings range available in height from 15 to 30 metres) in height from the ground. Your anxiety builds as you grip the release cord. Feel the G-forces when you pull the cord and start plummeting towards the ground. Then the massive cables take hold and swing you out towards the valley below.
The Giant Swing is suitable for a wide range of participants who can choose the height from which they wish to swing. A great activity that stimulates maximum challenge, excitement and interaction for the entire group.
Professional instructors facilitate your session and will set you up with your harnesses, helmets and safety gear. Participants swing in a controlled environment using industry approved techniques.
Our one, two and three sitter Giant Swing installation setup can be installed and use for guests in amusement, water & entertainment parks, adventure Camps, camping side, hotels and resort.
Giant Swing Construction
Superman Zipline Manufacture | Fly Like An Eagle
A Superman Zipline is defined as a cable that is suspended above an incline, to which a pulley and superman harness are attached for the rider. The incline of a zipline allows the rider to be pulled by gravity along the line. It's an experience you'll never forget and one of the best ways to learn to fly like an eagle.
